Note: This workflow requires at least MASCHINE 2.16.0 and Ozone Standard / Advanced 10.2.0.
There are two ways to load Ozone 10 in MASCHINE. You can use the Plug-in menu to open Ozone 10 with its default settings. Or you can directly open a Ozone 10 Factory preset from MASCHINE's Library FX Browser.
Loading the default Ozone 10 from the Plug-in menu
- In your MASCHINE project, set the focus to the Sound, Group, or the Master where you want to load Ozone 10. In this example we will load Ozone 10 on the Master channel.
- Click the plug icon and the "+" icon to open the Plug-in menu.
- Select VST3 > iZotope > Ozone 10.
- To open the Ozone 10 user interface, click the diagonal arrow:
- The knobs of your MASCHINE are automatically assigned to Ozone 10's parameters as shown in the software. You can switch Pages with the left / right arrows in the software or the left / right buttons on your controller.
Loading a Ozone 10 Factory preset from the Library FX Browser
- In your MASCHINE project, set the focus to the Sound, Group, or the Master where you want to load Ozone 10. In this example we will load Ozone 10 on the Master channel.
- Select FX in the Library tab, scroll down to Ozone 10 and click it.
- Double-click one of the presets to load it.
- To open the Ozone 10 user interface, click the diagonal arrow:
- The knobs of your MASCHINE are automatically assigned to Ozone 10's parameters as shown in the software. You can switch Pages with the left / right arrows in the software or the left / right buttons on your controller.