How to Load Ozone in Maschine

Note: This workflow requires at least Maschine 2.16.0 and Ozone Standard / Advanced 10.2.0.

There are two ways to load Ozone in Maschine. You can use the Plug-in menu to open Ozone with its default settings. Or you can directly open a Ozone Factory preset from Maschine's Library FX Browser.

Loading the default Ozone from the Plug-in menu

  1. In your Maschine project, set the focus to the Sound, Group, or the Master where you want to load Ozone. In this example we will load Ozone on the Master channel.
  2. Click the plug icon and the "+" icon to open the Plug-in menu.
    MasterPlugPlus.png
  3. Select VST3 > iZotope > Ozone.
    VT3IzoOzone.png
  4. To open the Ozone user interface, click the diagonal arrow:
    GUIArrow.png
  5. The knobs of your Maschine are automatically assigned to Ozone's parameters as shown in the software. You can switch Pages with the left / right arrows in the software or the left / right buttons on your controller.
    KnobAssignments.png

Loading a Ozone Factory preset from the Library FX Browser

  1. In your Maschine project, set the focus to the Sound, Group, or the Master where you want to load Ozone. In this example we will load Ozone on the Master channel.
  2. Select FX in the Library tab, scroll down to Ozone and click it.
    LibraryFXOzone.png
  3. Double-click one of the presets to load it.
    SelectPreset.png
  4. To open the Ozone user interface, click the diagonal arrow:
    GUIArrow.png
  5. The knobs of your Maschine are automatically assigned to Ozone's parameters as shown in the software. You can switch Pages with the left / right arrows in the software or the left / right buttons on your controller.
    KnobAssignments.png